In a message dated 98-07-07 01:41:57 EDT, you write: << On all the vertical pianos that I've done, there's room for the rod just under the solenoid rail. The bucket would have to be mounted under it leaving no room for the power supply on the inside of the lower cavity. It (the aforementioned power supply) could be mounted on the outside, betwixt the backposts. >> How about using a "backside" vertical system from Dampp-Chaser? Allan Allan L. Gilreath, RPT Gilreath Piano & ORgan Co. Calhoun, GA USA Gilreath@aol.com
This PTG archive page provided courtesy of Moy Piano Service, LLC