Buschmeister

[Michiel van Loon]

Jon,
I understand now. It only never happened to me that I had to use cloth thick
as 1.25mm in key bushings.
BTW what do you call thick?
Michiel
-----Original Message-----
From: Jon Page +ADw-jpage+AEA-capecod.net+AD4-
To: pianotech+AEA-ptg.org +ADw-pianotech+AEA-ptg.org+AD4-
Date: Friday, July 17, 1998 2:43 PM
Subject: Re: Buschmeister


+AD4-At 11:25 AM 7/17/98 +020-, you wrote:
+AD4APA-snip+AD4-Jon I don't understand why I should use a keypress?
+AD4APg-Michiel van Loon
+AD4-
+AD4-One does not have to use a key/caul press,
+AD4-but if you use a thick cloth then it will resist
+AD4-taking a bend at the shoulder.
+AD4-
+AD4-If the caul were so tight as to allow for this then
+AD4-you may have  a gap problem once the caul is removed.
+AD4-
+AD4-I am not familiar with plastic cauls and my preference
+AD4-is to insert a heated caul to aid in the compression set.
+AD4-
+AD4-Jon Page
+AD4-Harwich Port, Cape Cod, Mass. (jpage+AEA-capecod.net)
+AD4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4Afg-
+AD4-
+AD4-
+AD4AfgB+AH4AfgB+AH4AfgB+AGAAfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4AfgB+AH4Afg-
+AD4-