Also try spinning the pin as you measure. These things are not perfectly round either. I have found that the German pins from Pianotek are the most consistent, although I'm with Ed Foote on using the differences to advantage. At 10:25 AM 7/18/98 -0500, you wrote: >Don, > > I didn't mention it in my TP post, but on a lot of pins I would even get >different measurements at different points along the length. I tended to >let the "majority" rule. > >Avery > Vince Mrykalo RPT MPT IPT BA HA HA ~~~~~~~~~~~~~~~~~~ vince@byu.edu
This PTG archive page provided courtesy of Moy Piano Service, LLC