Hammer spring rail

[Lance Lafargue]

I would replace springs on the existing rails....  It would take maybe an
hour.  
Lance Lafargue, RPT
New Orleans Chapter
Covington, LA.
lafargue@iamerica.net

----------
> From: Clyde Hollinger <cedel@redrose.net>
> To: pianotech@ptg.org
> Subject: Hammer spring rail
> Date: Monday, July 27, 1998 9:35 AM
> 
> Friends:
> 
> I have two 1980 Everett studio pianos (school model 1155) in which a
> number of the hammer butt springs have broken off at the coil.
> 
> It is my understanding that the quickest, and therefore probably the
> cheapest, way to fix this is to replace the whole rail, springs and
> all.  From whom can I order these?  Any help or advice will be
> appreciated.  Thank you.
> 
> Clyde Hollinger, RPT
> Lititz, PA