squeeky pedal

[Edward Carwithen]

Sorry guys, I neglected to mention that it is a steel, or chrome plated rod.  




At 08:39 PM 3/1/98 EST, you wrote:
>
>In a message dated 3/1/98 6:01:07 PM, you wrote:
>
><< I isolated the problem to the place
>where the pedal rod goes through the guide.  It appears to be leather
>rather than felt pad in the opening.  What can I do to eliminate this pesky
>problem?>>
>
>   If you are describing a pitman arrangement, just replace the pitman with a
>smaller diameter dowel, using very short pins on both ends to keep it
>centered.  It will be a lot quieter if it is not touching the bushing at
all. 
>Regards,
>Ed Foote
>
>
Ed Carwithen
Oregon