Wim, At 17:14 3/3/98 EST, you wrote: >Problem: one warped key on a Baldwin console. > Depending on the type and severity of the warp (twist?) I've had success with kerfing. Using a back saw and walnut veneer which is slightly thicker than the saw kerf, it's amazing how much correction you can do, and never worry about the key warping back. Of course, if the most effective place to locaten the kerf is through the keytop, then another method would have to be used. ;-} Conrad Conrad Hoffsommer, RPT hoffsoco@martin.luther.edu Luther College Music Technician pno2ner@salamander.com Decorah, Iowa 52101 Voice (319)-387-1204 Fax (319)-387-1076 Oh wad some power the giftie gie us; to see oursel's as others see us! It wad some monie a blunder free us, and foolish notion. - Robert Burns
This PTG archive page provided courtesy of Moy Piano Service, LLC