At 01:02 PM 3/5/98 -0500, you wrote: > By the way, tell me more about Chris Gregg's Hammer Fitting Block. > Ted Simmons, Merritt Island, FL Ted, This block has four semi-circlar hollows drilled into its perimeter to varying depths with strips of sandpaper of different widths glued therein to the sides for detailing a specific area while the "bottom" of the hollows act as a guide alongside the hammer. Very ingenious. Chris' e-mail address is: cgregg@cadvision.com I'm sure he could exlpain it better. I'm ordering more. Jon Page Harwich Port, Cape Cod, Mass. (jpage@capecod.net) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~`~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC