At 01:40 PM 3/15/98 +0000, you wrote: >Dear list, > >I have a so-called Jaras 4-in-1 (which is rather a 5-in-1) grand >regulation device. The threads on one of the post are worn out and I >was wondering if we could get these parts separately. > >Thanks a lot! > >Michel Lachance, RPT Dear Michel, Just an idea, but if the threads are stripped out in the support block that holds the post, you can probably repair it by filling the hole with epoxy, drilling a new hole and using a tap of the appropriate size to cut new threads for the post. If the post has the stripped threads, you will probably have to contact Schaff Piano Supply and see if they have replacements. Sincerely, David Vanderhoofven
This PTG archive page provided courtesy of Moy Piano Service, LLC