Varnishing new tuning pins

[Jerry Hunt]

That would be most appreciated. Do you want to e-mail it to me?

Thanks.

Jon Page wrote:
> 
> May I suggest a means to insure evenly lined beckets?
> I have an info sheet and a jpg of the measuring device.
> I can't help you on the varnish, I use powdered rosin.
> 
> Jon Page
> 
> At 12:26 PM 3/27/98 -0600, you wrote:
> >I'm getting ready to do my first re-stringing job and am putting in new
> >pins. As suggested by many on this list, I plan on swabbing the holes
> >with varnish before inserting the new pins, and would appreciate some
> >input on what kind of varnish. I looked at my local homecenter
> >yesterday, and there's all kinds: oil based, water based, poly-whatever,
> >etc. They did have one kind of "Satin Spar Varnish". The more specific
> >the better (being the type that agonizes over such things).
> >
> >Thanks.
> >--
> >Jerry Hunt
> >Dallas, TX
> >Associate member PTG
> >
> >

-- 
Antispam note: remove NoBots from e-mail address.