Why not just apply epoxy and clamp allowing the screw holes to fill with epoxy and then drill into that. Jon Page At 10:16 PM 5/13/98 -0400, you wrote: >The wood on this piano has not been too badly damaged. The lamination >are seperated a little. Soemone suggested I install maple plugs, but I >don't have a plug making device. > >A local rebuilder says wood glue will work and to plug the holes with >hammer shank wood and glue. Of course the wood grain would not be >correctly oriented with hammer shank wood. But he feels certain that it >would hold well. > >You are right about how it was damaged. > >Thanks >Frank Cahill >N.Va. > >
This PTG archive page provided courtesy of Moy Piano Service, LLC