Plastic keytop removal

Pianotoone@AOL.COM Pianotoone@AOL.COM
Sat, 16 Jan 1999 17:43:50 EST


In a message dated 1/14/99 7:20:36 PM EST, jpage@capecod.net writes:

<< I would worry about the steam affecting the bushings.
 
 An iron at the proper setting with aluminium foil makes the key tops
 pliable and peel right off. A set can be removed in less than a half hour.
 
 Drat, the snow has turned to rain. Now the 2" snowfall will be gone
 by tomorrow. You guys in the mid west have all the luck.    :-)
 
 Jon Page
 Harwich Port, Cape Cod, Mass. (jpage@capecod.net) >>

Never has yet.  Remember the keys are upside down with the keytop facing the
steam.  The center rail bushing is outside the perimeter of the pan.

Dick


This PTG archive page provided courtesy of Moy Piano Service, LLC