Plastic keytop removal

Pianotoone@AOL.COM Pianotoone@AOL.COM
Sat, 16 Jan 1999 17:44:25 EST


In a message dated 1/14/99 7:20:36 PM EST, jpage@capecod.net writes:

<< I would worry about the steam affecting the bushings.
 
 An iron at the proper setting with aluminium foil makes the key tops
 pliable and peel right off. A set can be removed in less than a half hour.
 
 Drat, the snow has turned to rain. Now the 2" snowfall will be gone
 by tomorrow. You guys in the mid west have all the luck.    :-)
 
 Jon Page
 Harwich Port, Cape Cod, Mass. (jpage@capecod.net) >>


This PTG archive page provided courtesy of Moy Piano Service, LLC