Vertical touch weight

kam544@earthlink.net kam544@earthlink.net
Sun, 24 Jan 1999 16:54:37 -0600


>...an area that I failed to see mentioned so far:
>- Check for damper spoons "digging in" to the damper lever lift (spoon) felt.
>Jim Harvey, RPT

In taking DW/UW measurements, the damper system would not play into the
equation of excess friction readings, Jim.  (But, you already knew that,
didn't you!)

Keith McGavern
kam544@earthlink.net
Registered Piano Technician
Oklahoma Chapter 731
Piano Technicians Guild
USA
http://www.ptg.org/1999/conv/
PTG Convention, Kansas City, July




This PTG archive page provided courtesy of Moy Piano Service, LLC