---------------------- multipart/alternative attachment Hi Doug, The square socket screws and bolts are called Robertson's. I great invention if you need to place a lot of torque to the fastener with out the blade slipping. Pianophile sell a bit that fit's your tuning hammer, what a combination for tightness? Regards Roger At 09:51 AM 08/07/99 -0700, you wrote: > > Hi list, > A customer of mine has a Heintzman & Co. console, made in Toronto. The pin > block is pulling away from the back frame and I received the go ahead for the > repair. My problem is the bolts going through the plate into the block and > back frame are Thompson bolts ( square recess in head of bolt) and I can't > find any supplier in the U.S. with this large of Thompson driver. The plate > bolts have a square recess of 3/16" square or roughly 5mm. I wouldn't mind > being a set of Thompson drive sockets so I can tighten up a few other things > on this piano. Any suggestion for tool suppliers from are Canadian list > members? > Thanks > Doug Mahard, Associate Roger Jolly Baldwin Yamaha Piano Centre Saskatoon and Regina Saskatchewan, Canada. 306-665-0213 Fax 652-0505 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9c/e8/91/7a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC