Hi John, It would not be simple it would require a redesign of the case--not a likely thing to happen. At 08:21 AM 3/24/99 -0500, you wrote: >I have also had to replace the foot switch plug. I just thought of this: why not >move the jack from the back of the SAT to the front or side of the SAT? This >would give more clearance at the back of the SAT while sitting on verticals, and >would reduce the wire strain at the back of the plug. Opening the SAT and >repositioning the jack should be fairly simple. > >John Piesik, RPT >Oceanside, CA > > > > >I don't use a switch other than the one on the SAT itself. >Fast, convenient, increases body movement (reduces muscle set) and >less to mess with. > Newton > > Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. Tuner for the Saskatchewan Centre of the Arts drose@dlcwest.com http://www.dlcwest.com/~drose/ 3004 Grant Rd. REGINA, SK S4S 5G7 306-352-3620 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC