Brenda, I'm taking for granted the middle pedal/bass dampers also has some play in it? I really hate the two levers attached to one pedal idea. David Ilvedson, RPT Date sent: Mon, 24 May 1999 23:42:46 -0400 From: Greg Newell <gnewell@EN.COM> To: pianotech@ptg.org Subject: Re: vertical dampers Send reply to: pianotech@ptg.org > Brenda , > I've encountered quite a few kawai pianos with a ringing in the damper > stop rail. It's the same rail that used to have the hammer butt spring in > it. Anyway it's made of steel and rings like crazy on a good solid hammer > blow. I never spent much time on a cure because I never had a customer ask > about it so I figured ... don't fix what aint broken. > Greg Newell > > Brenda Mamer wrote: > > > Hi List, > > I have a piano teacher with a 15 yr. old Kawai vertical UST7. It has a > > general 'ringing'. Pedal has some lost motion, dampers seem to be > > following the strings. Wondering if people have been replacing these > > dampers with newer, perhaps longer dampers? Does this seem to be > > common with this model piano? She has it backed up to the corner of > > her room, not against the wall. Wondering if this might exaggerate the > > ringing? > > Thanks in advance, > > > > Brenda Mamer, RPT > > WI > > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC