On Wed, 10 Nov 1999 03:36:19 -0800 "George Todd" <gtodd@wa-net.com> writes: > Do you think I should use tuning pin tightener or drive in pins > deeper when there are some loose pins? These pins have never been > driven in, and a solution has never been used before. Which is > better to do? George- Many techs, including myself, favor the use of thin CA glue for this problem. Much is written on this in the archives. Ed Dryburgh at 1-800-glue-all is a good source for everything you will need. Mark Potter bases-loaded@juno.com
This PTG archive page provided courtesy of Moy Piano Service, LLC