Philip and List, I saw my first (and only) Wurlitzer UNIPLATE (a Studio explayer, serial #107087 - a 1929) in '94. Someone had "tuned" it in '90 and '91. It was at A-440 with maybe one or two unisons (literally) off a beat or two. I had to regulate it and the hammers needed shaping very badly, but customer did not want to do that. I guess that if a string breaks (from playing) you loosen the wedge in the tuning pin so you can remove or turn it more freely. By the way the customer bought a used Baldwin console that was newer and fit the decor of their livingroom better. So now I have something to tune every year. Ken Gerler Gerler Piano & Organ Service Black Jack, MO ----- Original Message ----- From: PHILIP D. COLEMAN <phdlite@aztec.asu.edu> To: <pianotech@ptg.org> Sent: Saturday, November 20, 1999 8:48 PM Subject: Tuning with WD-40 > > > For those who like puzzlers, see Part A only. For those who don't like > puzzlers (a la Seamus), read Part A, and reply to Part B. > > PART A: > > Yesterday I tuned a Wurlitzer baby grand (ser. # 103373). It had been > eleven years since the last tuning, but it was pretty close to A440. After > I started the tuning, I decided it would be helpful to spray WD40 at the base > of each tuning pin. Prizes awarded if you correctly conclude why lubricating > the tuning pins was helpful in spite of potential damage to wood parts. > > > > > > (Seamus et al scrolls for Part B) > > > PART B: > > How does one replace a tuning pin in one of these things? > > > Pahilip D. Coleman, RPT > Pahoenix Chapter > > > --checking for WD40 on my flame suit.
This PTG archive page provided courtesy of Moy Piano Service, LLC