Kimball/Piano disk

Joe & Penny Goss imatunr@primenet.com
Fri, 26 Nov 1999 20:13:48 -0900


Paul,
The dealer that this unit belongs to tells me that the PD was installed by
Kimball and that it was sent back to the factory once to address this issue.
and returned to the dealer. He has had the piano for 6 years.
Joe
----- Original Message -----
From: <paulmcrpt@juno.com>
To: <pianotech@ptg.org>
Sent: Friday, November 26, 1999 5:14 PM
Subject: Re: Kimball/Piano disk


> Of course the key bed could be the source of the problem, but loud
> mechanical noises could be from the setting of the pedal strike force, or
> from solenoid rail sections that are set (have fallen) too low so that
> the rubber tips on the strikers do not contact the key at rest.  Try
> analyzing this problem on the basis of whether the noise is all the time,
> only when pedaling, or more pronounced in one area of the keyboard.  If
> you find adjustments are needed to the PianoDisc, I would suggest working
> on the problem jointly with an experienced PD installer in your area.
> Call PD at 916-567-9999 or 619-258-1460 and they can suggest who might be
> available to help.
>
> Paul McMillin, RPT
> Carlisle, PA
>



This PTG archive page provided courtesy of Moy Piano Service, LLC