Dan, It sounds as if the letoff needs to be adjusted. When a piano has a muffler felt, letoff should be 1/8" plus the thickness of the muffler felt. Hope this is helpful. John Formsma Blue Mountain, MS -----Original Message----- From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of Dpshans@AOL.COM Sent: Sunday, November 28, 1999 9:30 PM To: pianotech@ptg.org Subject: Yamaha Mute Rail Dear List: I'm scheduled to look at a Yamaha U1 for a new client. They claim that with the mute rail in the "on" position the hammers from the upper tenor to the high treble seem to block, and not return. I asked them by phone to look, and they say the hammers seem to be striking in the center of the mute felt, so it wouldn't seem like a case of the hammer tops getting stuck against the bottom of the felt. Having not seen that many U1's, and not observing this before, it sounds a bit puzzling. Client is very happy with the piano when the mute rail is not in use. Has anyone dealt with this before? Any good repair ideas? Thanks in advance. Dan Dannenfelser Sacramento, CA
This PTG archive page provided courtesy of Moy Piano Service, LLC