Hi Jim, I'm fairly sure that a Baldwin model R set of hardware and rod will fit, give Kent Webb a call. Good luck trying to get in touch with Samick. Roger At 07:46 PM 25/10/99 -0400, you wrote: >Another university unit, another Kohler & Campbell, except this is a new >one, and the only thing Kohler & Campbell about it is the name on the >fallboard. > >The questions are: >1. Is this a Samick? If not, it sure missed a good chance. > >2. Does Samick return phone calls? > >3. One of the stamped metal damper rod hanger BRACKETS is broken in half. >It's a very clean break, complete with a nice 45-degree angle at the shear >point. If #2 question doesn't work out, does this bracket sound like a >candidate for silver soldering? If not, what are my options? What do I use >to align the pieces while joining? > >Obviously, a replacement part, or six (since it's going to happen again), >would be faster and superior, but failing that, I need to put this piano >back into service quickly. > >Thanks > > > > >Jim Harvey, RPT >Greenwood, SC >harvey@greenwood.net >________________________ > -- someone who's been in the field too long. > Roger Jolly BaldwinYamaha Piano Centre Saskatoon and Regina Saskatchewan, Canada. 306-665-0213 Fax 652-0505
This PTG archive page provided courtesy of Moy Piano Service, LLC