Tuning Forks... Terry

[Terry Beckingham]

At 10:31 PM 10/30/99 EDT, you wrote:

>Terry;
> Depending on how much room there is on the 'knob end' of the fork perhaps 
>you can slip some plastic tubing over it. This would help the temperature 
>exchange problem and might contribute to increased length of audible tone. 
>Worth a try.
>Jim Bryant (FL)

These are the plated forks Jim, like the John Walker nickel plated ones in
Shaff catalogue. Tubing might be difficult to get on, but I may be able to
find shrink tubing large enough.

Cheers

Terry