Brian Lawson wrote: > Hi list, a couple of questions > > 1) Is there an easy way to level tuning pins after a restring/re-pin other > than line of sight? I have a tuning pin punch that has a hard rubber nose, and a hole depth for the pin so that when you drive a pin in, you stop when the rubber nose comes in contact with the plate. This way all pins are driven in to almost exactly the same depth. If you are carefull to line all the wire holes up, and use 3.5 to 4.5 (depending on the wire / core size) windes per pin, they all come out perfect :) I cant remember where I got it from, long time ago > > > 2) Has anyone made a ratchet capstan tool, for when you really have to move > the capstans up or down a lot :( > not me.. but it sounds like a nice idea > > Brian Lawson Richard Brekne I.C.P.T.G. N.P.T.F. Bergen, Norway
This PTG archive page provided courtesy of Moy Piano Service, LLC