>Hi list, a couple of questions > >1) Is there an easy way to level tuning pins after a restring/re-pin other >than line of sight? > >I have a tuning pin punch that has a hard rubber nose, and a hole depth >for the >pin so that when you drive a pin in, you stop when the rubber nose comes in >contact with the plate. This way all pins are driven in to almost exactly the >same depth. If you are carefull to line all the wire holes up, and use 3.5 to >4.5 (depending on the wire / core size) windes per pin, they all come out >perfect :) I cant remember where I got it from, long time ago > > Brian Lawson now that's cool, if you remember where you got that i'd buy one. >2) Has anyone made a ratchet capstan tool, for when you really have to move >the capstans up or down a lot :( yes, i have seen it in a catalog somewhere, ummm, piano tech, schaff??? chris -Christopher D. Purdy R.P.T. School of Music Ohio University Athens OH -purdy@oak.cats.ohiou.edu (740) 593-1656 fax# (740) 593-1429
This PTG archive page provided courtesy of Moy Piano Service, LLC