I have used Protek on many Kawai's with the plastic flanges with no problems. Now my question...is this the same ABS plastic as in the newer Kawais? I would say yes, otherwise they wouldn't have the years of trial by fire in pianos to back up the ABS plastic parts! But I defer to Don M. David Ilvedson, RPT From: kam544@flash.net Date sent: Sat, 4 Sep 1999 23:20:03 -0500 To: pianotech@ptg.org Subject: Re: Kawai ABS Flanges Send reply to: pianotech@ptg.org > >...My concern was that perhaps the Protec would react with the plastic... > > > >Terry > > That certainly is a valid concern! (Protek) > > Don Manino, RPT and Technical Representative for Kawai > <dmannino@Kawaius.com> should be able to offer you some authoritative > comments on this matter. Seeking his viewpoints would be a smart move on > your part before you attempt to find out with the trial and error method > that might come back to haunt you. > > Keith McGavern > Registered Piano Technician > Oklahoma Chapter 731 > Piano Technicians Guild > USA > > > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC