Rig a Gig Gig

[Roger Jolly]

Hi Joe,
           Just wondering how things are going, and to inquire when you
will be sending my right handed jig. I will be  needing it in the near future.
Regards Roger 

At 07:40 AM 26/07/99 -0600, you wrote:
>Hi Roger,
>I have been studying the hammer tail device you gave me to develop.
>As I look at it it seems to me that a slight change would enable one to
>make the two mirror images into one gig on the same base. I am thinking
>that if one changed the angle adjustment screw that is on the side to a
>slotted slider that moved in a slot in the front of the tool, the mirror
>image could be back to back on the same base with two holddowns and two
>slider adjustments on the  opposite sides of the tool that hold the hammer.
>Please let me know what you think about this idea. 
>You can call me at 1 800 343 5257 if you wish to talk directly to me or by
>email.
>Joe Goss
> 
Roger Jolly
BaldwinYamaha Piano Centre
Saskatoon and Regina
Saskatchewan, Canada.
306-665-0213
Fax 652-0505