>Dear fellow techs. > >I have never seriously gotten into rebushing flanges; just enough to pass >the test on the course I took many years ago. My question is this: > >With replacement flanges only costing about 60 cents (US) retail, why would >I ever want to charge my customer the labor involved in rebushing a flange? >(which I imagine would be close to $5.00) > >Wally Scherer >Lake Worth, Florida Wally, Some things to consider: 1. Identical replacement flanges may or may not be available. 2. If available, they might be of lesser quality than the originals. 3. If available, the geometry might not be exactly the same as the originals. 4. The original flanges have probably been traveled; the new ones won't have been. 5. The quality of the bushing cloth varies greatly from supplier to supplier. In general, generic replacement flanges don't always have quality bushing cloth. Using Renner or other high quality bushing cloth will insure that your centers will be consistent from flange to flange. Regards, Tom Tom Seay School of Music The University of Texas at Austin mailto:t.seay@mail.utexas.edu
This PTG archive page provided courtesy of Moy Piano Service, LLC