----- Original Message ----- From: John R Fortiner <pianoserv440@juno.com> To: <pianotech@ptg.org> Sent: Sunday, September 19, 1999 1:25 PM Subject: Corfam removal > John wrote: > Has anyone tried using an air powered miniature belt sander to remove > Corfam from Baldwin vertical catchers? I have one ( the sander ) that is > compact enough to get between the catcher and backcheck with ease if the > bridal tapes are unfastened and thought that it would save a lot of > traveling as the hammer butts wouldn't have to be removed. Just was > looking for people that have tried using a similar tool to remove the > corfam. > > John R. Fortiner > Billings, MT. Hi John, I've haven't tried a miny belt sander for this job, but if I did, I would do it outside with a respirator on. Doug Mahard
This PTG archive page provided courtesy of Moy Piano Service, LLC