At 01:44 PM 09/22/1999 -0400, you wrote: > >>PS: the backcheck heads are swiveling on the wires, and CA isn't working...? >Greetings, > > Pull them off, fill the holes partially with baking soda, screw/put wires >back in and drip a few drops of water thin CA in there. Leave alone for an >hour and it should be rock solid. Make sure they are straight! >REgards, >Ed Foote Interesting. The CA glue won't work in acid conditions. However, isn't "rock solid" too tight in this case? Suppose you want to turn them back off, or further on, to change the back check height? Perhaps there's some happy medium for tightness. Suppose you just pull them off, glue size with CA, let harden, and then turn them back on? Susan Kline
This PTG archive page provided courtesy of Moy Piano Service, LLC