Brass Flange Rails (incl. dampers)

[John Ross]

Hi Tom,
Thank you for pointing themout to me.
It is amazing how many things we miss, when we look at the different
catalogues.
I hope they make the double brass rail as well. I don't think the repair
flanges would work for the damper flange sections if they break.
It is still ok, and hopefully it won't break.
Regards,
John M. Ross
Windsor, Nova Scotia, Canada.

Tom Cole wrote:

> John,
>
> You can get these parts from Schaff. They call them Kimball damper
> flanges, #539, each or set of 70.
>
> Tom
>
> John Ross wrote:
> >
> > Hi List,
> > I ran up against, an older Kimball that had a 'double' brass flange
> > rail.
> > The dampers on one edge and the hammer butts on the other.
> > The only problem I had to fix was, install a new damper return spring,
> > which was part of the damper butt plate.
> > I just wanted to know for future reference, are these parts still
> > available?
>
> > Regards,
> > John M. Ross
> > Windsor, Nova Scotia, Canada
>
> --
> Thomas A. Cole, RPT
> Santa Cruz, CA
> mailto:tcole@cruzio.com