> >Personally, I'm not thrilled by any of these low-enders, but it does a job, >and I'm dying to see another one soon so that I can try Roger's steam >voicing on it...perfect candidate. > Hi Mark, Here in Canada, we had the LU101 series, American assembled from Japanese components. Current model is a C108 , harsh, single felted, unvoiced hammers. After steam voicing they sound very similar to the old (superior) M1's. After voicing it becomes a nice entry level piano. All of the models in this series, recieve no voicing at the factory due to the competitive price point. Unfortunately both dealers and consumers demand a budget instrument with the Yamaha name. So some compromise had to be made. At least the voicing is a simple and fast fix. One burst high on each shoulder will do the trick, use just the tip of the iron to reach the underside of the hammer, and invert the iron to hit the top side. you don't even have to loosen the action bolts. I normally do these pianos before tuning, as it makes the tuning job a lot easier to hear the partials. Good day Mate Roger Roger Jolly BaldwinYamaha Piano Centre Saskatoon and Regina Saskatchewan, Canada. 306-665-0213 Fax 652-0505
This PTG archive page provided courtesy of Moy Piano Service, LLC