hammer traveling...

[Greg Newell]

Yah! The traveling paper fell out when you removed them.
Greg Newell

Charly Tuner wrote:

> I've decided to use my fellow tech's "jig", used for making butt flange
> spring loops for yamaha U1. I'm not doing this to save money, as a whole set
> is only about $32, but I figured since I would be using the same exact
> flange, I wouldn't have to "travel" them. OOOPS! for some reason, when i
> reinstall the flanges with the new loops, (I can make five at a time) and
> realign the hammers so they are perfectly spaced, when I travel them
> forward, they are not all keeping a uniform path...they were before! Is
> there something I'm doing wrong? I hope I won't have to shim every one now!
> They are the same flanges that were spaced and traveling uniformly before i
> took them out. Any ideas? Thanks.
>
> Terry Peterson
> Los Angeles, CA
> Associate Member, PTG
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com