Brian Find yourself a 1900's Chickering. The ones I've done had stepped flange both front and back. Paul Chick ----- Original Message ----- From: Brian Trout <btrout@desupernet.net> To: <pianotech@ptg.org> Sent: Sunday, May 28, 2000 2:52 PM Subject: Re: Plate Bushings - was Re: Bushing vs. bigger pin? Brian wrote: > > Another thing I've heard about, but never seen in person, are piano plates > that have two flanges, one on the front side of the pinblock, and one on the > back side of the pinblock. I would think with a setup like that, you could > do pretty much anything you wanted to, and have very few people who would > want to argue with you. >
This PTG archive page provided courtesy of Moy Piano Service, LLC