Plastic elbows

[Tony Court]

----- Original Message -----
From: <Pianogreig@AOL.COM>
To: <pianotech@ptg.org>
Sent: Friday, June 09, 2000 4:42 AM
Subject: Re: Plastic elbows


> In a message dated 6/8/00 11:57:30 AM Eastern Daylight Time,
> Tony_The_Tuner@nationwideisp.net writes:
>
> << Yes I have dealt with other suppliers in UK, and they did not have
them.
>  Although I am new to this list and the "net" in general, I have been a
>  tuner/technician for about 15 years, and became frustrated with inability
to
>  get matching parts. Although supply Co's here do quite a wide range of
>  "standard parts", the variety of piano actions far outstrips them.This is
>  why I started making parts to pattern. Do you think this would be of
interst
>  to technicians inUS? I would be glad of your opinion, and if so, a clue
as
>  to the best way to let  them know. Is there anyone in the US making parts
to
>  pattern, or are you all buying whole actions and key boards?
>  Thanks again
>  regards Tony.
>   >>
>
> Hi Tony:  Yes I think there is probably a market for you custom made parts
it
> you can reach the right people. This pianotech list is probably a good
start
> as well as your own website.  You might want to consider joining the PTG
> International division & subscribe the the Journal where you also place an
> ad.  For info on this PTG
> International Headquarters can be reached by phone: 816-753-7747;
> Fax: 816-531-0070; email: ptg@ptg.org; & www.ptg.org
>
> Someone else on the List just now provided the address of the Vagias
plastic
> elbows
> manufacturer.
>
> Hope this has been of some help.
>
> Regards,
> Bruce
>
> Thanks Bruce it's been brilliant! This whole thing has nearly done for
me...setting it up and learning how to do it, and trying to earn a living at
the same time............I owe you one !
Best wishes
Tony.