Take a look at the "Matchmaker" which is a copy router table/fixture sold by Woodtech. It's a little spendy at $600, and in addition it requires a another $$ expenditure for a good router, but it may give you some ideas for your own design. There's a picture and description of one in the Woodworkers' Supply Catalog 800 645 9292. Frank Weston -----Original Message----- From: JIMRPT@AOL.COM <JIMRPT@AOL.COM> To: pianotech@ptg.org <pianotech@ptg.org> Date: Monday, March 13, 2000 7:08 PM Subject: Re: Copy router for pinblocks > >In a message dated 3/13/2000 5:15:19 PM, you wrote: > ><<I'm making a copy router for duplicating pinblocks (like those goofy Knabe >ones). Has anyone used/made/seen one? >Thanks, >-- >Richard Anderson>> > >Richard get in touch with Shawn Hoar.... >Jim Bryant (FL) >
This PTG archive page provided courtesy of Moy Piano Service, LLC