This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Of course the solenoid would drop out without a spring. That is just = what the Pianocorder Vorsetzer did. Carl From: BUNKYPIANO@AOL.COM=20 To: pianotech@ptg.org=20 Sent: Friday, November 17, 2000 2:58 AM Subject: Re: Electric Key Pounder? solenoid upside down wouldn't work, it would just fall out, maybe if = you=20 drilled out the body of the solenoid itself and then turned the = plunger=20 upside down with some sort of extension you could get where you = want...=20 Actually dodge makes a fuel cutoff solenoid which has a heavy spring = holding=20 the plunger which forces it out when power is disconnected, cost is=20 +400.00....=20 tm=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/16/6e/d0/02/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC