John I'm interested in your process. You can send the info privately if you wish. Thanks! Paul Chick ----- Original Message ----- From: John R Fortiner <pianoserv440@juno.com> To: <pianotech@ptg.org> Sent: Thursday, September 07, 2000 12:37 AM Subject: Re: Plate Bushings > OK Newton: I thought you always had the answer for anyone's questions > :-) > Considering that I KNOW you have a bandsaw, and mostlikely a drillpress > - make them. If you want to know how I do it just write to me personally > and I'll be glad to describe to the best of my ability. Really a pretty > easy job once you set up for it. > I could even send a drawing of the jig that I use on my drill press and > on the bandsaw and would be glad to do so if that is what you want. > > John R. Fortiner > Billings, MT. > pianoserv440@juno.com > > On Wed, 06 Sep 2000 13:59:13 -0400 nhunt@jagat.com (Newton Hunt) writes: > > Is there anyone out there who has a source of 0.500" plate > > bushings? > > > > APSCO has 7/16 but not 8/16". Schaff has 6/16". > > > > I have a thick plate as well as a thick head. > > > > Newton > > ________________________________________________________________ > YOU'RE PAYING TOO MUCH FOR THE INTERNET! > Juno now offers FREE Internet Access! > Try it today - there's no risk! For your FREE software, visit: > http://dl.www.juno.com/get/tagj. >
This PTG archive page provided courtesy of Moy Piano Service, LLC