----- Original Message ----- From: "Charles Neuman" <piano@charlesneuman.net> To: <pianotech@ptg.org> Sent: August 15, 2001 7:04 PM Subject: Re: Restoring old uprights > Let me see if I understand the method described by Newton and Del below. I > understand it in two ways, and I think only one is right: 1) Do you route > out large sections of the pin block and then fill those sections with a > large piece of pinblock, cut to the right size? If so, how large are the > sections (how many pins are in each section)? --------------------------------------------- Look behind Door #1. Most of the time we route out two sections, the bass section and all of the tenor/treble section. Then cut and shape inserts to fit. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC