S&S tuning pins...

[Ron Nossaman]

>Ron,
>If Plate Bushings were made correctly, as they originally were designed,
>then they would definately have an effect on the overall torque. I
>personally can varify this with past rebuilds, using plate bushings made out
>of pin block material. And with the system I have devised for preparing
>regular plate bushings, prior to installation. This system retards the
>failure rate considerably.
>Regards,
>Joe Garrett

Ah yes. That's what I get for having a leaky brain. I do remember you
posting on this. Thanks for the smack up-side the memory. You must be the
guy everyone is contradicting.

Ron N