Steinway Rail Dowels

Patrick C Poulson pcpoulso@pacbell.net
Sun, 26 Aug 2001 07:41:22 -0700


This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Willem: I recall an article in the Journal about this very job. Susan Graham was the author, and as I recall the method was to use a new dowel (available from Steinway) to drive out the old dowel, and then drill the holes.  The article should be in the reprint CD.  Good luck, Patrick Poulson



---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8d/12/45/59/attachment.htm

---------------------- multipart/alternative attachment--


This PTG archive page provided courtesy of Moy Piano Service, LLC