This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Wim, Make your own out of piano wire. Joe Goss ----- Original Message -----=20 From: Wimblees@AOL.COM=20 To: Pianotech@ptg.org=20 Sent: Tuesday, December 11, 2001 9:24 AM Subject: reamers A couple of years ago, on the advice of Randy Potter, at one of the = conventions, I bought a set of center pin reamers, size 48 - 56, in a = black pouch. But I don't remember from whom I bought it. It is obviously = a hand made set. The only marking on the pouch is a mailing label tag = with "220 $16.50." =20 Until now, I used them sparingly. But since working on university = pianos, I use them more and more. Now I find that I don't have a #49. I = have 2 #48's. I would like to get a hold of whomever made it to see if I = can get a #49.=20 Does any one know who made those things?=20 Wim=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/6e/5d/53/63/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC