David, John I've installed several sets of ready cuts for Steinway from Schaff with good results. Paul Chick ----- Original Message ----- From: David Ilvedson <ilvey@jps.net> To: <pianotech@ptg.org> Sent: Sunday, February 04, 2001 12:24 PM Subject: Re: S&S "L" Damper felt > I just used installed ready cut for Steinways from Schaff and was impressed. > > David I. > > *********** REPLY SEPARATOR *********** > > On 2/4/01 at 10:32 AM John R Fortiner wrote: > > >Just wondering if any of you have had better experience with any one > >"brand" of felt when redoing dampers for an S&S "L". I have a customer > >that has a piano whose felt is totally shot ( read as bleeds a lot of > >sound) and is really just plain worn out therefore I am looking for > >people that can tell me which ones to avoid, and which one(s) to use. ( > >I would rather learn this from your experience than botch up a job > >because I used a felt that really wasn't good enough for the job. > > > >John R. Fortiner > >Billings, MT. > >________________________________________________________________ > >GET INTERNET ACCESS FROM JUNO! > >Juno offers FREE or PREMIUM Internet access for less! > >Join Juno today! For your FREE software, visit: > >http://dl.www.juno.com/get/tagj. > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC