S&S "L" Damper felt

[Newton Hunt]

When you get a box of flats the inside cut of a pair is the best cut
there is.  If you put the inside cut to the outside you will get
better looking dampers.

When I cut wedges I put a pen mark on one side of the back so that I
can always put the marked side toward the wire.  Makes seating easier.

Always keep the same side to the outside.

		Newton

Ron Nossaman wrote:
> 
> Who sells pre cuts that are actually cut square? And while I'm at
> it, I'm
> sure some of you mad scientists have tried various things to square
> up
> those "back cut" flats. Anyone ever have any luck?
> 
> Ron N