Newton Hunt nhunt@optonline.net
Wed, 14 Feb 2001 09:00:23 -0500


Most likely the retaining rail needs to move a little bit higher. 
That is if everything else is in good and proper order.

That is a real crude and rude system and a real pain to get to work
right.

		Newton

Gary McCormick wrote:
> 
> Good day all,
> 
> Last week there was discussion regarding adjusting sosenuto adjustment on
> Steinway grands.
> What about adjustments on a Steinway vertical?
> For example, on this piano you can hit a chord, press the pedal, and that
> chord sustains.  Good so far, however, continuing to hold the pedal, if you
> run a scale, there are several notes that will catch and hold as well.  Not
> many, and not all in a relative location.
> Any advice would be appreciated.
> Gary McCormick


This PTG archive page provided courtesy of Moy Piano Service, LLC