----- Original Message ----- From: "Ron Nossaman" <RNossaman@KSCABLE.com> To: <pianotech@ptg.org> Sent: Sunday, November 04, 2001 1:37 PM Subject: Re: Duplex > >Of course, I assumed the holes were straight and of course they are angled. > >(expletive deleted) > > Well, that figures, doesn't it? What a waste of profanity! It was just an optical delusion. I just stuck a drill in the hole and voila "It's straight". Somebody down there likes me. A tip > from my upcoming book, "The Value of Cowardice in The Design Process". Mine will be "Progress was okay for awhile, but it's gone on too dam long" > >Now the > >tail length will be about 130mm instead of 30mm. > > I expect you'll like that better. I hope so. I've been told more than once to tune and voice and evaluate the piano before tear down. Since I don't have any musical training and not much tuning and voicing experience I really don't know what I'm listening for. So I have to depend on other tooners to evaluate my work. I never know whether they compliment me because they like me or criticize me because they don't. That's my dilema. I appreciate your help!!!! Carl Meyer Assoc. PTG Santa Clara, California cmpiano@home.com > Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC