This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I would start with the November 1990 PTJ entry by David Stanwood, = Mastering Friction with the Balance Weight System. It will show you = that you should be using Balance Weight, not downweight, as the standard = and will give you one procedure. One caveat, there is a lot more to = this than just adding lead and it involves taking some precise survey = measurements before you start changing parts. But it seems this is = after the fact now so this will give you a start. For further reading I = would check Stanwood's articles in the Feb, March, April 2000 issues as = well as the June 1996.=20 David Love ----- Original Message -----=20 From: Patrick C Poulson=20 To: Pianotech@Ptg.Org=20 Sent: November 09, 2001 10:31 AM Subject: Weighing Off An Action Hello All: I have hung some new hammers and shanks on the action from = a Edmund Gram baby grand. It has no key weights, and with the new parts = the downweight on all the keys except the upper two octaves is in the = 60+ gram range. The friction levels in the upper octaves are acceptable, = and as the rest of the action has the same parts and has been = reconditioned the same way I don't believe that friction is the culprit = here. However, I have never weighted an action before. I am going to = look through the Journal CDs for articles on weighing off an action, and = would appreciate any advice or input as well. Is this a case of fools = rushing in where angels fear to tread, or an opportunity to learn a new = skill? Thanks, Patrick Poulson, RPT ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/3f/4b/76/9b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC