You're welcome Joe. Newton Joseph Garrett wrote: > > Speaking of Pin Block Material, <G>, I need more scrap. If any of you have > scrap pinblock material, laying around, I'll be happy to take it off your > hands. Any type pinblock material is ok, but I do prefer Delignet. However, > beggers can't be chosers. The last time I made this request I got some from > Newton, (Thanks buddy!), and from the rebuilding facility in Juarez, ( I > lost his email address due to a computer event! :-()) > For those inquiring minds, I use the scrap to make 3/4" plugs. I use them to > restore pinblocks on the ultra difficult type pin blocks, etc. Anyway, > responses will be gratefully accepted. I will pay postage and/or cost if you > so desire. > Many thanks, > Joe Garrett, RPT, (Oregon)
This PTG archive page provided courtesy of Moy Piano Service, LLC