Are we talking about a hammer that is loose on /separated from on the shank? or a broken shank? Jonathan Rhee Weymouth, MA > From: "Carl Meyer" <cmpiano@home.com> > Reply-To: pianotech@ptg.org > Date: Tue, 27 Nov 2001 13:31:59 -0500 > To: <pianotech@ptg.org> > Subject: Re: Glue(s) of choice. > > Thin ca would be my choice. Just flow it in. > > Carl Meyer Assoc. PTG > Santa Clara, California > cmpiano@home.com > > ----- Original Message ----- > From: "Phil Bondi" <tito@PhilBondi.com> > To: "Pianotech List" <pianotech@ptg.org> > Sent: Tuesday, November 27, 2001 10:22 AM > Subject: Glue(s) of choice. > >> I would like some guidance on this one. >> >> I frequently come across loose hammer heads in the field..and I do me >> 'field'. When you come across one, what type of glue do you use to make > the >> repair? >> >> Something tells me there is a 'better way' and method than the one I have, >> up to this posting, been using. >> >> looking forward to the responses, >> >> Phil >> >
This PTG archive page provided courtesy of Moy Piano Service, LLC