Planer and keytops

[Jon Page]

---------------------- multipart/alternative attachment
At 08:51 AM 10/14/2001 -0700, you wrote:
>Hi Jon,
>
>Any chance you'd have a few pictures your key
>cutting jigs you could send?  I have a set of
>keys (3 or 4 actually) sitting here looking at me
>and I had an idea that I'd like to be able to do
>them myself.
>Thanks,
>Brian T.

My router table is a scrap of plywood fashioned to hold the router upside-down.
The bit protrudes up through a hole in the center and the wood is covered with
bushing cloth for a slide-free/scratch-free surface.

The only tricky part is getting into the notch, or staying far enough from it.

Spurlock has good info on all this.

Regards,
Jon Page,   piano technician
Harwich Port, Cape Cod, Mass.
mailto:jonpage2001@mediaone.net
http://www.stanwoodpiano.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9b/59/d7/a8/attachment.htm

---------------------- multipart/alternative attachment--