I hear a lot of folks talking about using routing or sawing techniques in some way for removal of old key tops / fronts in preperation for renewal. I would like to hear a bit about why you all do this instead of using some form of heating up the the old keytops so as to "peel" off the old top / front material. thanks RicB Carl Meyer wrote: > This is what I use for cutting off the lip of the keytop front. > > Pass the key over the router bit very slowly. > -- Richard Brekne RPT, N.P.T.F. Bergen, Norway mailto:rbrekne@broadpark.no
This PTG archive page provided courtesy of Moy Piano Service, LLC